|
|
|
|
|
|
Multi-purpose, specially formulated titanium filled putty having outstanding
compressive strength and chemical resistance, recommended for most critical
repair and reclamation work.
|
|
Typical Properties |
|
 |
Tensile Strength, Kg/cm2 |
: |
365 |
|
|
Compressive Strength, Kg/cm2 |
: |
1260
|
|
|
Hardness, Shore D |
: |
95 |
|
|
Maximum Operating Temperature, °C |
: |
12 |
|
|
Mixing Ratio by volume (R : H ) |
: |
1 : 1 |
|
|
by weight (R : H ) |
: |
1 : 1 |
|
|
Pot life at 30°C , minute |
: |
20 |
|
|
Full cure at 30°C, hour |
: |
100 |
|
|
Coverage
per Kg, cm3 |
: |
450 |
|
|
Colour : |
: |
Blackish
grey |
|
|
|
|
|
Application Instructions :(Please read general instructions)
Surface Preparation
:
Roughen and clean the surface to
remove any dust, unsound material, plaster, paint, algae etc., Oil and
grease deposits are to be removed by steam cleaning or detergent scrubbing.
Acid etching is a must for chemically contaminated areas.
Mixing:
Resin and Hardener are supplied in pre-weighed packs and in different
colours for visual inspection of complete mixture for part mixing take Resin
: Hardener in Monkit in the ratio of 1 : 1 by volume or weight. Mix
homogeneously until uniform colour is obtained. Scrap sides, corners and
bottom of containers.
Application
:
Mixed compound is applied
initially as thin layers to avoid air entrapment and filling worn areas.
Apply required material to build up at least 0.5 mm more than desired
dimension for machining allowance. Smoothen the surface by gently roll over
moist hand over the surface during semi-dry condition. Machine the surface
to required dimension after curing time.
|
| |
|
|
|
#3, 1st
Cross, Netaji Circle, Mathikere Ext. Bangalore - 560054,
Email: unnathigroups@gmail.com, info@unnathi.com,
unnathicare@gmail.com
|
|
Phone:
080 - 23604570
Mobile : +91 9986004163, +91 9845554959 |
|
